On the same basis, if the shoot bolt needs a small hole drilled in it, you could drill through the frame from where the glass was fitted. Choose the best position to drill through carefully by comparing the shoot bolt position on another window on the ground floor.
If the shoot bolt still cannot be moved using a pick, make the start of the hole in the plastic bigger. The aim is to make a funnel type hole so that the shoot bolt can be levered up using the hole drilled in it.
Failing that, make an inspection hole through the plastic frame to get to the shoot bolt from the other side. You may need to jiggle the handle to get the shoot bolt to move. The hole s you drill will need to be hidden when the glass and shootbolt are replaced.
The window should still open and close. Check that the window lock operates freely when you have removed the shootbolts. Note: Your house insurance may stipulate the type of locking mechanism that should be fitted to a window. So you may need to replace the broken parts.
The gearbox fitted inside the window the handle shaft passes through it has probably broken. To shut the window, you will need to remove the shootbolt s , as one, or both have probably not retracted. The shootbolts are normally held in place by screws, but are sometimes pop riveted. You will then have to use an allen key or something similar to open the window. Sometimes you have to use a screwdriver to increase the gap to get the tool in, and use a pair of pliers to grip the allen key.
Use some cardboard or something similar between the window and your tools to try and protect the window from scratches. The best way to avoid this is to simply avoid unnecessary banging of the door or the window.
For loose hinges, as mentioned, you may check the screws in the hinges if they can still be tightened or replaced. But in the most difficult instances, we best advice to call the help of our emergency locksmith service.
Having a key break inside a lock is common to almost all types of key-entry doors or even key padlocks. It normally happens when you have an old key that is most often used. Get in touch with us before attempting to forcefully turn the keys against a jammed lock. Only because you could make it worse.
The correct measurements will make your job easier as you will need to line up with the window handle, you will need the backset, length and to know whether its offset or inline. Click here for our guide that will help you work all this out. Keeps and Screws For Window Locks All the extras you need to fit your Espag lock or Window Gearbox Changing your window lock should be an easy swap over however missing screws and keeps can slow the job down. If you have an obsolete lock then you may need to get extra screws or keeps to make the alternative window lock fit.
All the extra bits you need to repair your windows are available here. If there is anything extra that you need then give us a call on The locks on this page fit most types of UPVC window but it is advisable that you replace your lock with one of the same type and model if it is still made. Handles and Hinges stock 's of window locks and can usually find an exact replacement if it is still made or offer an alternative that will fit your window and save you pounds on fitting a new one.
If you are unsure of the lock you need or even if you just need some reassurance with your lock choice. Either call us on the phone the old fashioned way or email us with a photo of your existing lock. Some of the major Manufacturers of hardware are listed below but if you dont see your particular make please contact us. It was not unknown in the window industry for Manufacturers to make parts for companies and the company put there own stamp on it. A little bit like some of the big Grocery stores do.
One of the most commonly used handles for uPVC windows is the espagnolette handle. This is a multipoint locking mechanism that provides extra security thanks to its shootbolt rods. It has a spindle that protrudes from the handle and into the lock gearbox. When the handle is turned, the spindle activates the gearbox which turns the locks in the mechanism and opens it.
Should the lock or handle be broken, this process will not happen, so either the lock or handle or both, if necessary will need to be replaced.
0コメント